I was able to drive to the gas station with just those two cans and the recycling bin, and they didn't move around at all. With the RamBox Cargo Management System, I was able to pin both cans between the barrier and the tailgate, along with sticking my recycling bin in the middle so that they wouldn't slide towards the middle.

However, I run a horse stable and I regularly haul hay in the back of my trucks.įinally, whenever I go to get diesel fuel for our tractor, I have to bungee cord the cans to the side of my bed and drive carefully so that they don't fall over.

When you are hauling large boxes or plywood, that space doesn't make any difference, since those spots are typically empty when hauling large boxes, large pieces of wood, etc. The big difference with the RamBox system is that the areas around the wheel humps are filled in, and that is where you technically lose space in the bed. In fact, the bed with the Cargo Management System is about an inch wider than the area between the wheel humps in my bed. I then put that same piece of wood in the bed of the 20 with the RamBox system and, as you can see in the images below, it fit just as well. I laid that piece of wood in the bed of my own Ram without the RamBox system with a tape measure to show the width of the bed. I found an oddly shaped piece of wood in my workshop that measured 48 inches at its widest point.

The next bit of negativity with the RamBox Cargo Management system is the narrower bed, and that seemed like a valid enough complaint for me to conduct some tests.

Rambox storage system